• facebook
  • twitter
  • youtube
  • sns03
Search

Complete set of machines for making upvc windows and doors

sfjk

Remarks:

The following machines comply with these conditions:

1

 cdsfg'

For seam welding,the upvc profile is best white or single color,laminated or co-extrusion colored profile is unsuitable.
2

hjl

If the mullion corners are joined by welding,choose v notch saw.If the mullion corners are joined by screwing,choose end milling machine.
3

xcyjc

Production capacity per shift (8 hours) for a double head welding machine:100 to 120 units

Machine specifications:

1.Double head mitre saw

 
 htjf ModelPower supplyMotor power

Spindle speed

Air pressure

Air consumption

Blade size

Cutting angle:

Cutting W*H

Cutting length

Angle cutting tolerance

Planeness

Roughness

Machine demension

Weight

LJB2-450*3700380V/50Hz2*1.5Kw

2800r/min

0.5-0.8 Mpa

200 L/min

Φ450×Φ30×δ4mm Z=120

Manual 45°/90°/135°

90 degree:110*210mm

45 degree:110*150mm

400-3700mm

±5′

≤0.10

Ra12.5um

4500×1170×1400mm 1000Kg

 
 1. Feeding system adopts imported linear guide pair, with high accuracy and long service life.2. 90°and ± 45° cutting is available.

3. Saw blade rotate smoothly due to high accuracy main spindle.

4. Imported carbide saw blade give accurate processing and high endurance.

5. Imported linear bearing motion pair ensured steady processing accuracy.

6. Uniform speed feeding and smooth motion due to airdraulic damping cylinder.

7. Can add shields and digital display.

 

2.Copy router with three drilling machine

csdjkl ModelPower supplyFront motor(drill) power

Front spindle speed

Rear motor(copy router) power

Rear spindle speed

Air pressure

Air consumption

Drills size

Mills size

Max copy routing size

Machine demension

Weight

SSKC01-100380V/50Hz1.5kw

9600rpm

1.1kw

2800rpm

0.4-0.6 Mpa

50 L/min

1*Ø12mm,2*Ø10mm Ø5mm/Ø8mm

290*90mm

1000x1130x1500mm 195Kg

 
1.This machine is one of the main equipments for producing upvc doors and windows.
2.This machine is used for the processing of the mounting holes and slots of various types of locks on various profiles.
3.The machine consists of two parts: three-hole drilling and copy router milling.
4.The diameter of the profiled contact rod is the same as the diameter of the milling cutter (the contact rod is adjusted according to the diameter of the milling cutter), so the copy router milling can be performed in a ratio of 1:1.
5.High-speed cutting, pneumatic clamping, one-time clamping can achieve continuous machining in the vertical direction, high working efficiency, stable and reliable performance.
6.The machine is easy to operate, reliable in performance.

 3.Water slot milling machine(3-axis)

sdgfh ModelPower supplyMotor power

Spindle speed

Air pressure

Air consumption

Milling cutter size

Milling length

Milling depth

Machine demension

Weight

SCX3-28A220V/50Hz1.2Kw

25000r/min

0.4-0.6 Mpa 

30 L/min

Ø4/Ø5mm

50mm

40mm

2490×900×1650mm 

330Kg

 1.It has three spindles or axes that are located at three different angles: up and down, and horizontal. To meet the requirements of different profile processing;2.Simultaneous processing in three directions can be realized during one clamping, and the two processes of drilling and horizontal milling can be completed automatically at one time.

3.The machine adopts a modular structure, the internal structure of the three spindles is the same, and they can be used interchangeably. In work, the three spindles can be operated in single or combined operation. Free choice and easy control.

4. The up and down, left and right positions of the three spindles are easy to adjust, and the angle of the upper head is adjustable.

4.Mullion cutting machine

(It can be replaced by No. 6 v notch cutting machine in order to save cost)

sdg ModelPower supplyMotor power

Spindle speed

Air pressure

Air consumption

Blade size

Max cutting size

Cutting length

Machine demension

Weight

SJV-65380V/50Hz2*1.1Kw

2800r/min

0.4-0.6 Mpa 

100 L/min

Ø300/Ø400mm

W100*H80mm

320-2000mm

2200x620x1350mm 360Kg

 1.Used for mullion cutting when pvc window adopt the welding technology.2.saw blades are setted as 90° sothat can realize two V shape cutting by one time clamping. High precision and efficiency

3.Patent technology to prevern collapese cutting precedur.

4.Easily adjustable deepth, and adjustable stable feeding speed.

5. Automatic crossing cutting two mullion end in one time. Save profile cost and improve efficiency. Support arm ensure cutting precision.
6. Special clamping device ensure safety operation. Friendly using stopper for easily measuring

 

 5.Glazing bead saw

afdsf ModelPower supplyMotor power

Spindle speed

Air pressure

Air consumption

Blade size

Cutting height 

Cutting width

Cutting length

Machine demension

Weight

SYJW-1800380V/50Hz2*0.75Kw

2800r/min

0.4-0.5 Mpa 

15 L/min

2*Ø230mm+2*Ø120mm 33mm

100mm

320-1800mm

1350×500×1350mm 

220Kg

 1.This cutting machine used for glazing bead 45° cutting off and Chamfer cutting .2.Two dual gear saw blade , can cutting two glazing bead profiles one time , more efficiency .

3.Fence plate width can be adjusted for different type profile .

4.Blade feeding and profile pressing adopts pneumatic drive .

 

6.V notch cutting machine

dfg ModelPower supplyMotor power

Spindle speed

Air pressure

Air consumption

Blade size

Max cutting size

Cutting length

Machine demension

Weight

VJW-70A380V/50Hz2*1.1Kw

2800r/min

0.4-0.5 Mpa 

100 L/min

2*Ø300mm

W80*H100mm

320-2000mm

1350x620x1350mm 210Kg

 1.This machine is one of the main equipment for producing upvc doors and windows
2.This machine is a double saw blade cutting, mainly cutting the V-shaped notch.
3.The saw blade is made of hard alloy insert circular saw blade, which has high wear resistance and is suitable for high-speed cutting aluminum-plastic profiles.

7.Double head upvc seam welding machine

dfg ModelPower supplyTotal power

Air pressure

Air consumption

Welding length

Welding height

Welding width

Welding mullion width

Welding Temperature

Machine demension

Weight

SHB2AC 220V  50Hz2.5Kw

0.5-0.8Mpa

200L/min

400-3500mm

20-150mm

≤120mm

≤110mm

0~399℃

4300*950*1650mm

900Kg

1.This machine is suitable for welding the white upvc windows and doors. Two corners welding can be finished at one time.2.The left head in fixed,and the right head is movable for positioning the required frame length.Two heads can work simultaneously and individually.
3. Using pneumatic adjustment targeting, allows users to select a variety of welding ways ,to realize various welding requirements.Very simple to operate.
4.Welding gap size can be reached strict control.
5.High load-bearing,the whole machine is made by steel.
6.Co-extrusion tool is precision manufactured by induction hardening.The tools are also changeable.
7.Pneumatic locking device on the right head is optional .8.It can achieve the frame and mullion corners welding.

 

 

8-1.CNC corner cleaning machine(3 tools)

sdgjgy ModelPower supplyMotor power

Spindle speed

Air pressure

Air consumption

Processing profile height

Processing profile width

Groove depth 

Groove width

Clean type

PLC

Machine demension

Weight

SQJ04AC 380V 50Hz 3Kw

2800r/min

0.5-0.8 Mpa 

60 L/min

30-120mm

20-120mm

0.3±0.15mm

3±0.15mm 

both surface, outside

DELTA

1510x850x1780mm 

600Kg

 1.This machine used for PVC window door welding corner cleaning .
2. Adopts for both surface,outside and adhesive tape installation channels welding seam cleaning of PVC door window 90° corner .
3.Adopts different type profile , custom-made different cleaning tools .
4.Adopts CNC system,can save different process program for different type profile to automatic cleaning. 

8-2.Electric corner cleaning tools

图片1 图片2 图片3
Type V-corner surface cleaning External corner cleaning Internal corner cleaning
Power supply 220V/50Hz 220V/50Hz 220V/50Hz
Input power 230W 230W 230W
Rotating speed 18000rpm 18000rpm 18000rpm
Cutter size Blade:Ø75*22*3mm*60T Milling cutter:Ø12*32*60mm Milling cutter:Ø12*32*60mm
Dimension 32X9X5 cm 35X10X10 cm 35X10X10 cm
Weight 1.8Kg 1Kg 1Kg

Others(optional):

 Single axis end milling machine

图片4 ModelPower supplyMotor power

Motor speed

Applicable material

Machine dimension

Mills

Weight

LXD03-200380V/50Hz1.5kw

2800r/min

PVC/aluminum

850x740x1280mm

To order

150Kg

 1.  When the mullion need to be screw joint , can use this end milling machine . This machice is designed for milling the aluminum profiles end ,to make sure the mullion can be connected.2.  To fit different profiles end milling , the milling cutters can be changed.

 

Double head seamless welding machine

图片5 ModelPower supplyTotal power

Air pressure

Air consumption

Welding length

Welding height

Welding width

Welding mullion width

Welding Temperature

Machine demension

Weight

SHWA2AC 220V  50Hz2.5Kw

0.5-0.8Mpa

200L/min

400-3500mm

20-120mm

≤120mm

≤110mm

0~399℃

4300*950*1700mm

1000Kg

1.Using pneumatic adjustment targeting, allows users to select a variety of welding ways ,whether seam or seamless,to realize various welding requirements.Very simple to operate. 
2.Two heads can work simultaneously and individually.
3.Weld two-point, single point, transom, cross -transom and special angle.
4.Strict control of welding gap size,make sure the welding parts surface clean both inside and outside smoothly.
5.High load-bearing,the whole machine made by steel.
6.Coextrusion tool is precision manufactured by induction hardening.The tools also changeable.
7.The head use pneumatic locking device to be fastened . 

 Upvc arch bending machine

图片6 ModelPower supplyInput power

Heating method

Heating temperature

Bending diameter

Maximum heating length

Workbech dimension

Heating tank dimension

Weight

Packing dimension

SYH-1800220V/50Hz7kw

Electric (Air)

90-130℃500-1800mm

3700mm

2860x1220x710mm

3700x340x800mm

600kg

3900*800*1410mm

1. Special for bending UPVC window profile.
2. Electric heating to warm up the profile to become soft.
3. Moulds include shaping and filling strips,they are made according to samples.

Single head screwing machine

图片7 ModelPower supplyMotor power

Steel reinforcement thickness

Scewing depth

Profile height

Screw specs

Screw type

 

Error rate

Air pressure

Machine demension

Weight

LDJ1-100380V/50Hz0.5kw

1-2mm

32mm

20-100mm

Ø4.2*13/Ø4.2*16mm

Cross countersunk head

2%-5%

0.6-0.8 Mpa 

800x1000x1700mm 150Kg

1. Automatic screw-feed and locking.2. Screw mounting height adjustable, punching depth adjustable.3. Adjustable front and rear position of the head, handwheel operation, ruler indication, efficient and practical.

 Steel reinforcement punching machine

图片10 ModelPower supplyMotor power

Driving method

Machine demension

Weight

GHCC-1AC 380V 50Hz 1.5Kw

Hydraulic

600x750x1350mm 

200Kg

This machine is used for punching the steel reinforcement to avoid the profile locking mounting hole.

Post time: Nov-19-2021